19
FUEL SYSTEM
INTAKE AIR TEMPERATURE SENSOR
Service repair no - 18.30.09
Remove
PURGE CONTROL VALVE
Service repair no - 17.15.39
Remove
1.
2.
Disconnect multiplug from temperature sensor.
Remove sensor from inlet manifold.
1. Disconnect multiplug from purge control valve.
2. Release clip and disconnect hose from valve.
3.
4.
Release valve from charcoal canister.
Remove valve.
5.
Discard ’O’ ring.
Refit
3.
4.
5.
Clean sensor threads and mating face.
Fit sensor to inlet manifold. Tighten to 7 Nm
Connect multiplug to sensor.
Refit
6.
7.
8.
Clean valve and valve location.
Position and secure valve to charcoal canister.
Connect hose to purge valve and secure with
clip.
9.
Connect multiplug to valve.
6
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)