FRONT SUSPENSION
SELF LOCKING NUTS
WARNING: Where self locking nuts are
removed, they must be replaced with new
nuts of same specification.
RADIUS ARM
Service repair no - 60.10.16.
Remove
1.
2.
Loosen road wheel retaining nuts.
Raise front of vehicle. Support chassis on stands
and remove wheel.
PANHARD ROD
3.
4.
Support front axle weight with jack.
Remove radius arm to chassis side member
fixings.
Service repair no - 60.10.07.
Remove
1.
2.
3.
4.
Remove fixings at mounting arm.
Remove fixings at axle bracket.
Remove Panhard rod.
Press out flexible bushes. Ensure the steel
tubing locates on the outer edge of the bush and
not on the rubber inner.
5.
6.
7.
Disconnect track rod at ball joint.
Remove fixings, radius arm to axle.
Lower radius arm front end to clear axle and
remove from vehicle.
Refit
5.
Fit replacement bushes.
CAUTION: Apply pressure to outer edge of
bush, and not rubber inner.
6.
Reverse removal procedure. 1 to 4. Tighten to
88Nm
REPAIR
1
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)