19
FUEL SYSTEM
THROTTLE CABLE
Service repair no - 19.20.06
Remove
INTAKE HOSE TURBOCHARGER
Service repair no - 19.42.11
Remove
1.
Disconnect battery negative lead.
1. Disconnect battery negative lead.
2.
3.
4.
Remove pin and clevis pin securing throttle
cable to throttle lever.
Pull ferrule from abutment bracket and withdraw
throttle cable.
Release throttle cable from clip on bulkhead.
2.
3.
Loosen clip and disconnect intake hose from
turbocharger.
Loosen clip and disconnect breather hose from
intake hose.
4.
Remove clip and disconnect hose from air
cleaner, discard clip.
5.
Remove intake hose
Refit
5.
Remove pin and clevis pin securing throttle
cable to throttle lever.
6. Reverse removal procedure. Use a new clip to
6.
7.
Release grommet from bulkhead.
Withdraw throttle cable from engine
compartment.
secure intake hose to air cleaner.
Refit
8.
Reverse removal procedure. Use new pins to
secure clevis pins.
9.
Adjust throttle cable. See Adjustment,
Throttle Cable
2
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)