26
COOLING SYSTEM
Refit
8.
9.
Clean fan blades and mating faces.
Fit fan blades to coupling. Secure with screws.
Tighten to 24 Nm.
10.
Using LRT-12-093 and LRT-12-094, fit fan
assembly to pump. Tighten to 56 Nm.
Fit cooling fan upper cowl. Secure with clips.
4.0 V8 only:Fit coolant hose to cooling fan upper
cowl.
11.
12.
13.
14.
15.
Fit serpentine drive belt.
Fit pulley fixings, remove pulley.
Reconnect battery negative lead.
3.
Use LRT-12-093 to prevent coolant pump pulley
from turning and using LRT-12-094, unscrew
viscous coupling from water pump.
NOTE: Nut securing viscous unit to water
pump has a right hand thread. Release by
turning anti-clockwise when viewed from
front of viscous unit.
4.
Remove fan and coupling assembly.
Do not carry out further dismantling if component
is removed for access only.
NOTE: Mark fan with reference to assist
refitting.
5.
Remove 4 Allen screws securing blades to
coupling. Remove coupling.
6.
7.
Remove serpentine drive belt.
Remove pulley fixings, remove pulley.
2
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)