Tdi
Timing belt fitting and tensioning
33. Slacken belt tensioner securing bolt to finger
tight.
NOTE: It is important that belt tensioning
is carried out carefully and accurately. The
following procedure involves tensioning
the belt twice to ensure that it is equally tensioned
between each gear. New and original belts are
tensioned to different figures.
34. Insert 13 mm square drive extension bar in
tensioner plate.
NOTE: Belt tensioning should be carried
out using a dial type torque meter having a
range not exceeding 60 Nm. The torque
meter should be used in the almost vertical
position.
28.
Ensure timing marks are correctly aligned, pin
from special tool LRT-12-045 is correctly
inserted in injection pump gear and timing tool
LRT-12-044 (LRT-12-085 if EDC) is fitted to
flywheel housing with pin located in flywheel slot.
Or if automatic: Timing tool LRT-12-044 is fitted
to engine backplate and pin located in ring gear.
Fit belt observing rotational marks made during
removal. Feed belt over gears keeping it tight on
drive side.
35. Apply a tension of 14 to 16 Nm for a new belt or
11 to 13 Nm for an original belt. When tension
is correct tighten clamp bolt.
36. Tighten injection pump gear bolts.
37. Remove pin from injection pump gear.
38. Disengage timing pin from timing slot in flywheel
or ring gear.
39. Rotate crankshaft one and three quarter turns in
a clockwise direction; then continue rotation until
timing pin in timing tool can be engaged with slot
in flywheel or ring gear.
29.
30.
31.
32.
Fit idler pulley.
Slacken injection pump gear retaining bolts.
Adjust belt to correctly sit in gears.
40.
41.
Disengage timing pin.
Insert pin from special tool LRT-12-045 in
injection pump gear and through into pump
flange.
42.
43.
44.
45.
46.
47.
Slacken injection pump gear retaining bolts.
Slacken tensioner and retension belt.
Tighten injection pump gear retaining bolts.
Remove pin from injection pump gear.
Remove timing tool and refit plug.
Fit front cover plate using new gaskets. See
Front Cover Plate
REPAIR
11
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)