19
FUEL SYSTEM
All glow plugs
EGR VALVE
Service repair no - 19.45.01
Remove
5.
6.
Remove terminal nut from glow plug, disconnect
wire from glow plug terminal.
Remove glow plug.
Refit
7.
8.
Clean glow plug and seating.
Coat threads of glow plug with suitable anti-seize
compound operational to a temperature of
1.
2.
3.
Disconnect multiplug from EGR valve.
Disconnect vacuum pipe from EGR valve.
Remove 2 Allen screws securing EGR valve to
exhaust manifold.
Remove 2 bolts securing hose to EGR valve.
Remove EGR valve and discard gaskets.
1000
°C.
9.
10.
Fit glow plug. Tighten to 23 Nm.
Connect wire to glow plug terminal and secure
with nut.
4.
5.
NOTE: Feed wire must be connected to
No. 4 glow plug terminal.
Refit
11.
No. 3 glow plug: Lubricate new ’O’ ring with
engine oil and fit to Hummel valve. Fit valve and
secure with bolt. Tighten to 15 Nm.
6. Clean mating faces of EGR valve and exhaust
manifold.
7. Reverse removal procedure. Tighten bolts to 25
Nm.
No. 1 glow plug - air conditioning models
12.
13.
Position compressor to front cover, fit bolts.
Tighten to 25 Nm.
Fit drive belt to compressor pulley and adjust
tension. See ENGINE, Repair, Drive Belt
Renew
All models
Reconnect battery negative lead.
14.
8
REPAIR
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)