04
GENERAL SPECIFICATION DATA
Piston rings
Number of compression rings .......................................... 2
Number of control rings .................................................... 1
No 1 compression ring ..................................................... Nitrided steel barrel faced
No 2 compression ring ..................................................... Tapered spherical barrel marked ’TOP’
Width of compression rings .............................................. 1.478 - 1.49 mm
(Top) ................................ 1.21 - 1.23 mm
Compression ring gap ...................................................... 0.40-0.65 mm
(Top) ................................ 0.3 - 0.5 mm
0.0582 - 0.0587 in
0.0476 - 0.0484 in
0.0157 - 0.0256 in
0.0118 - 0.0197 in
Oil control ring type .......................................................... Aclonoform
Oil control ring width......................................................... 3.0 mm
Oil control ring rail gap ..................................................... 0.38-1.40 mm
0.1181 in
0.0150 - 0.0551 in
Camshaft
Location ........................................................................... Central
Bearings ........................................................................... Non serviceable
Number of bearings.......................................................... 5
Drive................................................................................. Chain 9.52 mm pitch x 54 pitches.
Camshaft End Float ......................................................... 0.076 - 0.355 mm
Tappets ........................................................................... Hydraulic self-adjusting
Valves
0.003 - 0.014 in
Length:
Inlet.................................. 116.59 - 117.35 mm
Exhaust ........................... 116.59 - 117.35 mm
Inlet.................................. 46°- 46°25’
4.590 - 4.620 in
4.590 - 4.620 in
Seat angle:
Exhaust ........................... 46°- 46°25’
Head diameter:
Stem diameter:
Stem to guide clearance:
Inlet.................................. 39.75 - 40.00 mm
Exhaust ........................... 34.227 - 34.48 mm
Inlet.................................. 8.664 - 8.679 mm
Exhaust ........................... 8.651 - 8.666 mm
Inlet.................................. 0.025 - 0.066 mm
Exhaust ........................... 0.038 - 0.078 mm
1.565 - 1.575 in
1.3475 - 1.3575 in
0.3411 - 0.3417 in
0.3406 - 0.3412 in
0.0010 - 0.0026 in
0.0015 - 0.0031 in
0.3913 in
Valve lift (Inlet and Exhaust) ............................................ 9.94 mm
Valve spring length fitted .................................................. 40.4 mm (1.59 in) at pressure of 29.5 kg (65 lb)
Lubrication
System type ..................................................................... Wet sump, pressure fed
Oil pump type ................................................................... Rotor
2
Oil pressure ...................................................................... 2.11 to 2.81 kg/cm (30 to 40 psi) at 2400 rev/min with
engine warm
Oil filter-internal ................................................................ Wire screen, pump intake filter in sump
Oil filter-external ............................................................... Full flow, self-contained cartridge
4
INFORMATION
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)