CHASSIS AND BODY
10.
11.
Remove the pivot bolts and washers securing
the hinge links to the seat squab.
If necessary remove the clips securing the cover
and detach the cover.
FRONT SEAT BELTS
Service repair no - 76.73.10
Remove
Refit
12.
1.
2.
Move the front seat to the fully forward position
or tilt the seat forward (3 door vehicles).
Remove cover to gain access to the seat belt
upper mounting bolt.
Reverse removal procedure.
Seat cushion
Remove
NOTE: 3 door models have a
non-adjustable, upper mounting.
13.
14.
15.
Remove the seat from the vehicle.
Remove the seat squab.
3. Remove the flanged securing bolt to release the
upper mounting and spacer.
4. Remove the cover and bolt securing the lower
mounting to the floor.
5. Detach the door seals from the ’B’ post
sufficiently to allow removal of the lower trim
panel from the post.
6. Release the seat belt from the split section at the
top of the trim panel and withdraw the panel.
7. Remove the securing bolt and detach the inertia
reel from the bottom of the ’B’ post.
Remove the pivot bolts and washers securing
the hinge bracket and detach the bracket.
Invert the seat base and remove the screws and
rivets securing the base cover to the base.
Raise the seat base cover, to gain access to the
stay pivot bolts, remove the bolts and washers
and withdraw the stay and seat base cover.
If necessary remove the clips and detach the
cushion cover.
16.
17.
18.
5
door model illustrated
Refit
19.
Reverse removal procedure.
REPAIR
29
| Categories | Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1998 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)