1998 Land Rover Workshop Manual

57
STEERING
STEERING LOCK STOPS
Service repair no - 57.65.03
Check
NOTE: Alternatively lock stop adjustment
may be carried out using following
procedure.
Check
1.
Measure clearance between tyre wall and radius
arm at full lock. This must be 20 mm.
1.  Measure stop bolt protrusion as shown in
RR1697M. This must be 40.5 mm.
Adjust
Adjust
2.
3.
4.
5.
Loosen stop bolt locknut.
Turn stop bolt as required.
Tighten locknut.
Check clearance between tyre wall and radius
arm on each lock.
2.  Loosen stop bolt locknut.
3.  Turn stop bolt as required.
4.  Tighten locknut.
5.  Check wheel position at full lock.
2
ADJUSTMENT
Product Specification
CategoriesRange Rover
Tags
Model Year1998
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 873 pages
Document TypeWorkshop Manual
LanguageEnglish
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field