Firmly press, hold for 5 seconds and
HomeLink® button up to two sepa-
rate times to activate the door. If the
door does not activate, press and
hold the just-trained HomeLink® but-
ton and observe the indicator light.
Some devices may require you to
replace this Programming step 3 with
procedures noted in the "Gate
chapter. If the HomeLink® indicator
light does not change to a rapidly
blinking light after performing these
If the indicator light stays on con-
stantly, programming is complete
and your device should activate
when the HomeLink® button is
pressed and released.
Position the end of your hand-held
transmitter 1-3 inches (2-8 cm)
away from the HomeLink® button
you wish to program while keeping
the indicator light in view.
Simultaneously press and hold
both the HomeLink® and hand-
• If the indicator light blinks rapidly
for 2 seconds and then turns to a
constant light, continue with
"Programming" steps 5-7 to com-
plete the programming of a rolling
code equipped device (most com-
monly a garage door opener).
held transmitter buttons until the
HomeLink® indicator light changes
5. At the garage door opener receiv-
er (motor-head unit) in the garage,
locate the "learn" or "smart" but-
ton. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit.
from a slow to a rapid blinking
light. Now you may release both
the HomeLink ® and hand-held
|Categories||Hyundai Manuals, Hyundai Sonata Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Sonata|
|Document File Type|
(1 votes, average: 5 out of 5) Automotive readers have rated 2016 Hyundai Sonata Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Just what I was looking for as a brand new owner. Thanks.