10.
Loosen the lug nuts with the
and
If you have a tire gauge, check the
tire pressure (see “Tires and Wheels”
in chapter 8 for tire pressure instruc-
tions.). If the pressure is lower or
higher than recommended, drive
slowly to the nearest service station
and adjust it to the recommended
pressure. Always reinstall the valve
cap after checking or adjusting tire
pressure. If the cap is not replaced,
air may leak from the tire. If you lose
a valve cap, buy another and install it
as soon as possible. After changing
tires, secure the flat tire and return
the jack and tools to their proper stor-
age locations.
■
Rear
wheel
lug
nut
wrench
remove them with your fingers.
Remove the wheel from the
studs and lay it flat on the ground
out of the way. Remove any dirt
or debris from the studs, mount-
ing surfaces, and wheel.
Install the spare tire onto the
studs of the hub.
Tighten the lug nuts with your fin-
gers onto the studs with the
11.
12.
OLF064013
smaller end of the lug nuts clos- 14. Use the wheel lug nut wrench to
est to the wheel.
tighten the lug nuts in the order
shown. Double-check each lug
nut until they are tight. After
changing tires, have an author-
ized HYUNDAI dealer tighten the
lug nuts to their proper torque as
soon as possible. The wheel lug
nut should be tightened to
13.
Lower the vehicle to the ground
by turning the jack handle coun-
terclockwise.
6
NOTICE
Check the tire pressure as soon
as possible after installing a spare
tire. Adjust it to the recommended
pressure.
65~79
lb.ft (9~11 kg.m).
6-19
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |
Just what I was looking for as a brand new owner. Thanks.