What to do in an emergency
7.
Connect the other end of the sec- Disconnect the jumper cables in the
ond jumper cable to the black, exact reverse order you connected
negative (-) chassis ground of
your vehicle (4).
them:
1.
Disconnect the jumper cable from
the black, negative (-) chassis
ground of your vehicle (4).
Disconnect the other end of the
jumper cable from the black, neg-
ative (-) battery/chassis ground of
the assisting vehicle (3).
Do not allow the jumper cables to
contact anything except the cor-
rect battery or jumper terminals or
the correct ground. Do not lean
over the battery when making
connections.
2.
8.
Start the engine of the assisting
vehicle and let it run at approxi-
mately 2,000 rpm for a few min-
utes. Then start your vehicle.
3.
4.
Disconnect the second jumper
cable from the red, positive (+)
battery/jumper terminal of the
assisting vehicle (2).
Disconnect the other end of the
jumper cable from the red, positive
1
VQA4001
4.
Connect the jumper cables in the
exact sequence shown in the illus-
tration. First connect one jumper
cable to the red, positive (+)
jumper terminal of your vehicle
(1).
If your vehicle will not start after a
few attempts, it probably requires
servicing. In this event please seek
qualified assistance. If the cause of
(+)
(1).
jumper terminal of your vehicle
5.
6.
Connect the other end of the your battery discharging is not
jumper cable to the red, positive apparent, have your vehicle checked
(+)
assisting vehicle (2).
battery/jumper terminal of the by an authorized HYUNDAI dealer.
Connect the second jumper cable
to the black, negative (-) battery/
chassis ground of the assisting
vehicle (3).
6-6
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |
Just what I was looking for as a brand new owner. Thanks.