WINDSHIELD DEFROSTING AND DEFOGGING
•
For maximum defrosting, set the Manual Climate Control System
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
WARNING
To defog inside windshield
Windshield heating
Do not use the
or
posi-
• If warm air to the floor is desired
while defrosting or defogging, set the
mode to the floor-defrost position.
tion during cooling operation in
extremely humid weather. The
difference between the temper-
ature of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility could cause an acci-
dent resulting in serious injury
or death. In this case, set the
mode selection knob or button
3
•
Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
all side windows.
•
Clear all snow and ice from the
hood and air inlet in the cowl grill to
improve heater and defroster effi-
ciency and to reduce the probability
of fogging up the inside of the wind-
shield.
OLF044231
1.
Select any fan speed except “0”
position.
Select desired temperature.
to the
position and fan
speed control knob or button to
a lower speed.
2.
3.
4.
Select the
or
position.
NOTICE
The outside (fresh) air will be select-
ed automatically.Additionally, the air
conditioning will automatically oper-
ate if the mode is selected to the
position.
If the engine temperature is still
cold after starting, then a brief
engine warm up period may be
required for the vented air flow to
become warm or hot.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the correspon-
ding button manually.
3-147
Product Specification
Categories | Hyundai Manuals, Hyundai Sonata Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Sonata |
Document File Type | |
Copyright | Attribution Non-commercial |
Just what I was looking for as a brand new owner. Thanks.