48
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
In the rear seat, move tow ard the center of the seat to
position the belt away from you r neck.
Seat Belt Pretensioners
The seat belts for both front seating positions are
equ ipped with pretensioning devices that are designed to
rem ove any slack from the seat belts in the event of a
collision. These devices improve the perform ance of the
seat belt system by assu ring that the belt is tight abou t the
occupant in a collision. Pretensioners work for all size
occupants, inclu ding those in child restraints.
Lap/Shoulder Belt Untwisting Procedure
Use the follow ing proced ure to untw ist a twisted lap/
shou lder belt.
1.
Position the latch plate as close as possible to the
anchor point.
2.
plate, grasp and twist the belt webbing 180° to create a
fold that begins immediately above the latch plate.
At abou t 6 to 12 inches (15 to 30 cm) above the latch
NOTE: These devices are not a substitu te for prop er seat
belt placem ent by the occupant. The seat belt still must be
worn snu gly and positioned prop erly.
3.
The folded webbing must enter the slot at the top of the
latch plate.
Slide the latch plate upward over the folded webbing.
The pretensioners are triggered by the Occupant Re-
straint Controller (ORC) (refer to inform ation on Airbags
in this section). Like the front airbags, the pretensioners
are single use item s. After a collision that is severe
enou gh to deploy the airbags and pretensioners, both
must be rep laced .
4.
folded webbing.
Continu e to slide the latch plate up until it clears the
Product Specification
Categories | Chrysler 300 Manuals, Chrysler Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I have mobile mechanic and my window wouldn't roll up. The fuses weren't labeled so I downloaded the Manuel and "boom" there we have it. No driving to 16 places looking. Lovviinng it!