192
STARTING AND OPERATING
PARKING BRAKE
When the parking brake is applied with the
ignition on, the Brake Light in the instru ment
cluster will come on.
slightly on the lever, then depress the button on the end
of the lever and push the lever fully down tow ard the
floor.
NOTE: The parking brake lever will not release unless
the lever is pulled up slightly past its applied position.
NOTE: This light only show s that the parking brake is
on. It does not show the degree of brake application.
If the parking brake is applied while the vehicle is
moving, a chim e will sou nd to alert the driver. The chim e
will sou nd up to 10 times or until the vehicle has
retu rned to a stop .
Before leaving the vehicle, make sure that the parking
brake is set. To set the parking brake, pull up firm ly on
the lever. Also place the gear selector in the Park position
(autom atic transaxle) or Reverse (manu al transaxle). To
release the parking brake, apply the brake pedal, pull up
| Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)