126
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Turn Signals
Headlight Time Delay
Move the multi-function control lever up or down and
the arrow s on each side of the instru ment cluster will
flash to show prop er operation of the front and rear turn
signal lights. You can signal a lane change by moving the
lever partially up or down.
There is also a featu re that delays turning off the vehicle
lights for 30, 60, or 90 second s after the ignition switch is
turned OFF. To activate the head light delay, the multi-
function control lever must be rotated to the “Off”
position after the ignition switch is turned OFF. Only the
head lights will illuminate during this time. Refer to
High Beam Switch
“
EVIC- Custom er Program mable Featu res” in Section 4
Pull the multi-function control lever tow ard s you to
switch the head lights to “High” beam . The “High Beam
Ind icator Light ” on the instru ment cluster will illumi-
nate. Pull the multi-function control lever a second time
to switch the head lights to “Low” beam .
to turn this featu re “On/ Off” or set the time interval.
WINDSHIELD WIPERS AND WASHERS
The front and rear wipers and washers are operated by a
switch in the right side control lever. Turn the end of the
control lever to select “Lo,” “Hi,” or one of the five speed
sensitive interm ittent wind shield wiper speed s. Refer to
Passing Light
You can signal another vehicle with you r head lights by
lightly pulling the multi-function control lever tow ard
the steering wheel. This will cause the head lights to turn
on at high beam and rem ain on until the lever is released .
“
Speed Sensitive Interm ittent Wiper System ” in this
section. For inform ation on the rear wiper and washer,
refer to “Rear Wind ow Featu res” in this section. (See
page 170 for more inform ation.)
Product Specification
Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
---|---|
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I love my jeep but I need an owner's manual