WHAT TO DO IN EMERGENCIES
335
9.
Finish tightening the lug nu ts. Push down on the
WARNING!
wrench while tightening for increased leverage. Alternate
nu ts until each nu t has been tightened twice. Correct
wheel nu t tightness is 130 N·m (95 ft. lbs). If in doubt
abou t the correct tightness, have them checked with a
torqu e wrench by you r authorized dealer or at a service
station.
Raisingthevehiclehigherthannecessarycanmake
thevehiclelessstable.Itcouldslipoffthejackand
hurtsomeonenearit.Raisethevehicleonlyenough
toremovethetire.
6.
Remove the lug nu ts and wheel.
10. Lower the jack to it’s fully closed position.
7.
Position the spare wheel/ tire on the vehicle and install
WARNING!
the lug nu ts with the cone-shap ed end tow ard the wheel.
Lightly tighten the nu ts. To avoid the risk of forcing the
vehicle off the jack, do not tighten the nu ts fully until the
vehicle has been lowered .
6
Aloosetireorjack,thrownforwardinacollisionor
hard stop could endanger the occupants of the ve-
hicle.Alwaysstowthejackpartsandthesparetirein
theplacesprovided.
8.
Lower the vehicle by turning the jack screw counter
clockw ise, and rem ove the jack and wheel blocks.
11.
Secure the tire, jack, and tools in their prop er loca-
tions.
Product Specification
Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
---|---|
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I love my jeep but I need an owner's manual