262
STARTING AND OPERATING
FOUR-WHEEL DRIVE OPERATION
Quadra-Trac IIா Operating
Instructions/Precautions — If Equipped
Quadra-Trac Iா Operating
Instructions/Precautions — If Equipped
The Quadra-Trac I is a single speed (HI range only)
The Quadra-Trac II transfer case is fully autom atic in the
norm al driving 4 HI mode. The Quadra-Trac II transfer
case provid es three mode positions — four wheel drive
high range, neu tral, and four wheel drive low range.
transfer
case
which provid es convenient full-tim e
4
–wheel drive. No driver interaction is requ ired . This
transfer case divid es engine torqu e almost evenly with 48
percent of engine torqu e to the front axle and 52 percent
of engine torqu e to the rear axle. The Brake Traction
Control System (BTC), which combines stand ard ABS
and Traction Control, provid es resistance to any wheel
that is slipping to allow additional torqu e transfer to
wheels with traction.
This transfer case is fully autom atic in the 4 HI mode.
This transfer case divid es engine torqu e almost evenly
with 48 percent of engine torqu e to the front axle and 52
percent of engine torqu e to the rear axle. When speed
differences are increased betw een the front and rear drive
shafts, the transfer case can transm it up to 100 percent of
available engine torqu e to the front or rear drive shafts.
NOTE:
for cond itions where LOW range is recom mend ed. Refer
to “Off-Road Driving Tips” in this section.
The Quadra-Trac I system is not approp riate
When additional traction is requ ired , the 4 LOW position
can be used to lock the front and rear driveshafts together
and force the front and rear wheels to rotate at the sam e
speed . The 4 LOW position is intend ed for loose, slippery
Product Specification
Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
---|---|
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I love my jeep but I need an owner's manual