UNDERSTANDING THE FEATURES OF YOUR VEHICLE
109
To Set At A Desired Speed
To Vary The Speed Setting
When the vehicle has reached the desired speed , press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed .
When the Speed Control is on and set, speed can be
increased by pressing and hold ing the RES·ACCEL but-
ton. When the button is released , a new set speed will be
established .
To Deactivate
Tapping the RES·ACCEL button once will resu lt in a 2 3
mph (3 km/ h) speed increase. Each time the button is
tap ped, speed increases, so tap ping the button three
times will increase speed by 6 mph (9 km/ h), etc.
A soft tap on the brake pedal, norm al braking, or pressing
the CAN CEL button will deactivate the Speed Control
withou t erasing the memory. Pressing the ON·OFF but-
ton or turning off the ignition erases the memory.
To decrease speed while speed control is on and set, press
and hold the COAST button. Release the button when the
desired speed is reached , and the new speed will be set.
To Resume Speed
To resu me a previou sly set speed , press and release the
RES·ACCEL button. Resume can be used at any speed
above 30 mph (50 km/ h).
To Accelerate for Passing
Dep ress the accelerator as you would norm ally. When the
pedal is released , the vehicle will retu rn to the set speed .
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)