16
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
consists of program ming a blank key to the vehicle
electronics. A blank key is one which has never been
program med.
will sou nd and the SKIS ind icator light will begin to
flash. Turn the ignition switch OFF and rem ove the
second key.
NOTE: When having the Sentry Key System serviced ,
bring all vehicle keys to the dealer.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 second s. After 10
second s, a single chim e will sou nd . The SKIS ind icator
light will stop flashing, turn on for 3 second s; then turn
off.
Customer Key Programming
You can program new keys to the system if you have two
valid keys by doing the follow ing:
The new Sentry Key has been program med. Repeat this
process to program up to a total of 8 keys.
1.
Cut the additional Sentry Key Transp ond er blank(s) to
match the ignition switch lock cylind er key code.
General Information
2.
Insert the first valid key into the ignition switch and
The Sentry Key Immobilizer System complies with FCC
rules part 15 and with RSS-210 of Ind ustry Canad a.
Operation is subject to the follow ing two cond itions:
turn the ignition switch ON for at least 3 second s but no
longer than 15 second s. Turn the ignition switch OFF and
rem ove the first key.
1.
This device may not cause harm ful interference.
3.
Insert the second valid key and turn the ignition
switch ON within 15 second s. After ten second s, a chim e
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)