WHAT TO DO IN EMERGENCIES
279
•
Do not let passengers sit in the vehicle when it is on a
jack.
place the autom atic transm ission in P (Park), or manu al
transm ission in N (Neutral), and turn the ignition to OFF
for both vehicles.
•
•
Do not get und er the vehicle when it is on a jack.
3.
Turn off the heater, rad io and all unnecessary electrical
Failu re to follow the “Tire Changing Proced ure” may
resu lt in personal injury or damage to you r vehicle.
load s.
4.
Connect one end of a jumper cable to the positive
•
Only use the jack in the positions ind icated .
term inal of the discharged battery. Connect the other end
of the sam e cable to the positive term inal of the booster
battery.
JUMP STARTING PROCEDURE
NOTE: Check the charge ind icator on the battery. If the
ind icator is light or yellow, rep lace the battery.
5.
Connect the other cable, first to the negative term inal 6
of the booster battery and then connect the other end to
a non-p aint metal surface on the engine of the vehicle
with the discharged battery. Make sure you have a good
contact on the engine.
1.
such as watch band s or bracelets that might make an
unintend ed electrical contact.
Wear eye protection and rem ove any metal jewelry
2.
vehicle, park that vehicle within booster cable reach but
withou t letting the vehicles tou ch. Set the parking brake,
When boost is provid ed by a battery in another
6.
battery, let the engine idle a few minu tes, then start the
engine in the vehicle with the discharged battery.
Start the engine in the vehicle which has the booster
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)