26
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Program Additional Transmitters
Continu e to hold the “Unlock” button, wait at least 4 but
no longer than 10 second s, then press and hold the
PANIC button for at least 1 second . Release both buttons
simultaneou sly.
NOTE: If vehicle is equ ipped with the optional Elec-
tronic Vehicle Inform ation Center (EVIC) in the overhead
console, the transm itters may also be program med
throu gh the EVIC display. For additional inform ation,
refer to “Overhead Console — If Equipped” in Section 3.
3. Program Each Transmitter: All transm itters to be used
with you r vehicle must be program med as follow s:
Up to 4 transm itters can be program med to you r vehicle.
To obtain additional transm itters, contact you r autho-
rized dealer. To program a transm itter (within 23–50 feet
Press and release the ЉLockЉ and ЉUnlockЉ buttons simul-
taneou sly, follow ed by a press and release of ANYbutton
on each transm itter to be program med. You will hear a
chim e when a transm itter has been successfu lly pro-
gram med.
(7–15
meters) of the vehicle), perform the follow ing
proced ure:
1.
Gather every transm itter that is to be used with the
General Information
vehicle inclu ding any transm itters that are currently
program med.
This transm itter complies with FCC rules part 15 and
with RSS-210 of Ind ustry Canad a. Operation is subject to
the follow ing two cond itions:
2.
Enter Program Mode: Turn the ignition to the ON
position, and using a currently program med transm itter;
1. This device may not cause harm ful interference.
press and hold the ЉUnlockЉ button on the transm itter.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)