44
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Enhanced Driver Seat Belt Use Reminder System
(BeltAlert)
NOTE: The follow ing step s must occur within the first
60 second s of the ignition switch being turned to the ON
or START position. The manu factu rer does not recom -
If the driver’s seat belt has not been buckled within 60
second s of starting the vehicle and if the vehicle speed is
greater than 5 mph (8 km/ h), the Enhanced Warning
System (BeltAlert) will alert the driver to buckle their seat
belt. The driver shou ld also instru ct all other occupants to
buckle their seat belts. Once the warning is triggered , the
Enhanced Warning System (BeltAlert) will continu e to
chim e and flash the Seat Belt Warning Light for 96
second s or until the driver’s seat belt is buckled .
mend deactivating
(BeltAlert).
the Enhanced Warning System
1.
Turn the ignition switch to the OFF position, and
buckle the driver’s seat belt.
2. Turn the ignition key to the ACCESSORY/ RUN posi-
tion (engine does not need to be running), and wait for
the Seat Belt Warning Light to turn off.
The Enhanced Warning System (BeltAlert) will be reacti-
vated if the driver’s seat belt is unbu ckled for more than
3. Within 60 second s of starting the vehicle, unbu ckle
and then re-bu ckle the driver’s seat belt at least three
times within 10 second s, end ing with the seat belt
buckled .
10
second s and the vehicle speed is greater than 5 mph (8
km/ h).
The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by you r authorized dealer or by
follow ing these step s:
4. Turn the ignition key to the OFF position. A single
chim e will sou nd to signify that you have successfu lly
completed the program ming.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)