12
ENGINE
Refit
OIL SEAL - CRANKSHAFT - REAR
Service repair no - 12.21.20
Remove
9.
10.
Position new crankshaft pulley to vice.
Remove 3 bolts and remove damper from
crankshaft pulley.
11.
Using a lint free cloth, thoroughly clean oil seal
recess and the running surface on crankshaft
pulley.
1. Remove flywheel. See this Section.
2. Remove sump gasket. See this Section.
12.
13.
Fit crankshaft pulley.
Fit LRT-51-003 to crankshaft pulley and secure
with 2 bolts.
14.
Fit new crankshaft pulley bolt and tighten to 460
Nm (340 lbf.ft).
NOTE: It is recommended that a torque
multiplier is used to tighten crankshaft
pulley bolt.
15.
16.
Remove 2 bolts and remove LRT-51-003 from
crankshaft pulley.
Fit damper to crankshaft pulley, fit bolts and
tighten to 80 Nm (60 lbf.ft) .
17.
18.
19.
Fit auxiliary drive belt.
Fit radiator. See COOLING SYSTEM, Repair.
Fit underbelly panel. See CHASSIS AND
BODY, Repair.
3.
4.
Remove 5 bolts securing oil seal housing to
cylinder block.
Remove seal housing.
Refit
5.
Clean seal housing mating face on cylinder
block.
6.
Position seal protector, LRT-12-061 over
crankshaft boss. Fit new seal and housing
assembly and remove tool LRT-12-061.
CAUTION: Oil seal must be fitted dry.
4
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)