1999-2002 Land Rover Defender Workshop Manual

CHASSIS AND BODY
Refit
12.
PANEL - MOUNTING - REAR DOOR - FROM 02MY
Service repair no - 76.11.29
Position panel assembly, fit bolts and nut and
tighten to 10 Nm (7lbf.ft).
13.
14.
15.
Connect multiplug to motor.
Remove
Secure harness clips and sleeve.
Connect interior handle link to latch and secure
with clip.
1.  Remove plastic sheet.  See this Section.
16.
Connect multiplug to solenoid, locate solenoid to
mounting panel and tighten screws.
Fit and secure link.
Remove wedges, lower glass and locate to
regulator. Fit bolts and tighten to 6 Nm (4 lbf.ft).
Raise and lower glass to check operation.
Fit plastic sheet.  See this Section.
Adjust door lock solenoid.  See  ELECTRICAL,
Adjustment.
17.
18.
19.
20.
21.
2.
Lower glass and remove 2 bolts securing door
glass to regulator.
3.
Release glass from regulator, raise and wedge
in raised position.
REPAIR
25
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field