1999-2002 Land Rover Defender Workshop Manual

12
ENGINE
ENGINE AND ANCILLARIES
Service repair no - 12.41.01.99
Remove
1.
Remove underbelly panel.  See  CHASSIS AND
BODY, Repair.
2.
3.
Drain engine oil.
Remove radiator.  See  COOLING SYSTEM,
Repair.
4.
5.
6.
Remove turbocharger.  See  FUEL SYSTEM,
Repair.
Remove starter motor.  See ELECTRICAL,
Repair.
Remove air filter.  See  FUEL SYSTEM, Repair.
9.
Not EU3 model:- Apply two 3 mm diameter
beads of sealant, Part No.STC 5433 to areas ’A’
shown on illustration.
CAUTION: Excessive use of sealant could
result in blockage of oil drain hole,
arrowed ’B’ in illustration.
10.
Fit new gasket to camshaft cover. fit cover and
tighten bolts to 10 Nm (7 lbf.ft) .
Position breather hose and secure clip.
Fit engine acoustic cover.
Reconnect battery negative lead.
Fit battery cover.
11.
12.
13.
14.
7.
Loosen clip screw and release air intake hose
from intake elbow.
8.
Release clips and disconnect coolant hoses
from fuel cooler and coolant rail.
14
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field