1999-2002 Land Rover Defender Workshop Manual

ENGINE MANAGEMENT SYSTEM
ENGINE CONTROL MODULE (ECM)
Service repair no - 18.30.03
Remove
SENSOR - ENGINE COOLANT TEMPERATURE
(ECT)
Service repair no - 18.30.10
Remove
1.
2.
Release fixings and remove battery cover.
Disconnect battery negative lead.
1.  Disconnect battery negative lead.
3.
Remove RH seat cushion, release clip and
remove ECM access panel.
2.
3.
Remove spring clip and disconnect ECT sensor
multiplug.
Position cloth around ECT sensor to absorb
coolant spillage.
4.
Remove 3 bolts, release ECM and disconnect 2
multiplugs. Remove ECM.
4.
5.
Remove ECT sensor.
Remove sealing washer and discard.
Refit
Refit
6.
5.
6.
7.
8.
9.
Position new ECM and connect multiplugs.
Fit ECM and tighten bolts.
Fit access panel and RH seat cushion.
Reconnect battery negative lead.
Fit battery cover and secure with fixings.
Clean sealing washer, sensor threads and
sensor location.
Coat sensor threads with Loctite 577 and fit new
sealing washer.
Fit ECT sensor and tighten to 20 Nm (14 lbf.ft).
Fit spring clip to multiplug and connect multiplug
to ECT sensor.
7.
8.
9.
10.
11.
Top up cooling system.
Run engine to normal operating temperature.
Check for leaks around ECT sensor.
Reconnect battery negative lead.
12.
REPAIR
1
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field