1999-2002 Land Rover Defender Workshop Manual

ENGINE
Camshaft bearings - check clearance
7.
Measure and record widest portion of Plastigage
on each camshaft bearing journal.
1.
2.
Position camshaft in cylinder head.
Place a piece of Plastigage along the centre line
of each camshaft bearing journal.
Carefully fit the camshaft carrier ensuring it is
located on dowels.
8.  Compare figures obtained with camshaft bearing
clearance.
Camshaft bearing clearance = 0.04 to 0.10
mm (0.002 to 0.004 in).
3.
9.
If any bearing clearance is found to exceed
figures given, repeat the above procedure using
a new camshaft.
CAUTION: Do not rotate camshaft.
CAUTION: If, after repeating the bearing
clearance check with a new camshaft the
bearing clearances are still excessive, a
new cylinder head and camshaft carrier assembly
must be fitted.
10.
11.
Remove all traces of Plastigage using an oily
cloth, do not use a scraper.
Discard camshaft carrier bolts.
4.
Fit original camshaft carrier retaining bolts and
tighten in sequence shown to 25 Nm (18 lbf.ft) .
5.
6.
Using sequence shown, loosen then remove
camshaft carrier retaining bolts.
CAUTION: Do not discard bolts at this
stage.
Carefully remove camshaft carrier.
OVERHAUL
13
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field