1999-2002 Land Rover Defender Workshop Manual

CHASSIS AND BODY
7.
Remove seal from glass.
TRIM CASING - FRONT DOOR - FROM 02MY
Service repair no - 76.34.01
Remove
CAUTION: Lay glass on felt covered
supports and be careful not to damage the
obscuration band. Do not stand on edge
as this can cause chips which subsequently
develop into cracks.
Refit
8.
9.
Clean glass and fit seal. Ensure seal is fully
located on glass.
Thoroughly clean the tail door glass mounting
flange.
10.
11.
12.
Fit drawstring to seal.
Lubricate seal.
With assistance, position glass and seal to
aperture, locate lower edge and fit seal using
drawstring.
13.
14.
15.
Clean glass and check seal fit.
Connect Lucars to heated rear screen.
Fit CHMSL assembly.  See  ELECTRICAL,
Repair.
16.
17.
Fit wiper arm to spindle, align blade to glass and
tighten nut to 18 Nm (13 lbf.ft).
Fit spare wheel and tighten nuts to 45 Nm (33
lbf.ft).
1.
Remove 2 screws securing door pull and
remove door pull.
2.
Remove screw securing door release
escutcheon and remove escutcheon.
REPAIR
31
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field