12
ENGINE
GASKET - CYLINDER HEAD
Service repair no - 12.29.02
Remove
NOTE: The following procedures cover
engines fitted with or without an EGR
cooler. The EGR cooler is bolted to the
front of the cylinder head.
1.
2.
3.
4.
Remove underbelly panel. See CHASSIS AND
BODY, Repair.
Drain cooling system. See COOLING
SYSTEM, Adjustment.
Remove camshaft cover gasket. See this
Section.
Remove cooling fan. See COOLING SYSTEM,
Repair.
9.
Remove turbocharger oil feed banjo bolt and
discard sealing washers.
Remove 3 nuts, release turbocharger from
exhaust manifold, discard gasket and tie
turbocharger aside.
10.
5.
Release clips and disconnect air flow meter from
air filter.
11.
12.
Remove 2 bolts securing engine harness to
camshaft carrier.
Disconnect fuel injector, coolant and compressor
sensors.
6.
7.
Disconnect multiplug from air flow meter.
Loosen clip and remove air inlet hose from
turbocharger.
13.
Disconnect 4 heater plug connectors.
8.
Remove 3 bolts and remove exhaust manifold
heat shield.
6
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)