CHASSIS AND BODY
PANEL - UNDERBELLY - FRONT AND CENTRE
Service repair no - 76.10.50
Remove
CUBBY BOX
Service repair no - 76.25.04
Remove
1.
2.
Raise vehicle on 4 post ramp.
Mark front propellor shaft and front differential
flanges for reassembly.
1.
2.
Open cubby box lid and remove 2 caps
concealing rear fixing bolts.
Remove bolts securing rear of cubby box.
3.
Remove 4 bolts and release propellor shaft from
front differential.
3. Open flap concealing front fixing bolts.
4. Remove bolts securing front of cubby box.
5.
Remove cubby box.
Refit
6.
7.
Fit cubby box to vehicle.
Fit bolts securing front of cubby box and
reposition flap.
8.
9.
Fit bolts securing rear of cubby box.
Fit caps over bolts.
10.
Close cubby box lid.
4.
5.
Remove 12 bolts securing front and centre
underbelly panels.
Remove front and centre underbelly panels.
Refit
6.
7.
Position front and centre underbelly panels.
Fit and tighten bolts securing front and centre
underbelly panels.
8.
9.
Position front propellor shaft to differential and
tighten bolts to 48 Nm (35 lbf.ft).
Lower vehicle.
REPAIR
1
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)