1999-2002 Land Rover Defender Workshop Manual

12
ENGINE
Refit
MOUNTING - FRONT - RH
Service repair no - 12.45.03
Remove
9.
Fit shield to mounting ensuring cut-away portion
is correctly aligned.
Fit mounting and mounting bracket.
Fit mounting bracket to cylinder block bolts and
tighten to 48 Nm (35 lbf.ft) .
Fit nuts securing mounting to chassis and tighten
to 85 Nm (63 lbf.ft) .
Fit mounting to mounting bracket nut and tighten
to 85 Nm (63 lbf.ft) .
10.
11.
1.  Remove engine acoustic cover.  See this
Section.
2.  Remove fixings, remove battery cover.
3.  Disconnect battery negative lead.
4.  Raise front of vehicle.
12.
13.
14.
15.
16.
Remove engine support chains.
Clean oil filter adaptor housing and mating face.
Fit oil filter adaptor housing using a new gasket
and tighten bolts to 25 Nm (18 lbf.ft) .
Fit centrifuge assembly.  See this Section.
WARNING: Support on safety stands.
17.
5.
6.
Remove 4 bolts, move fuel cooler to one side.
Fit suitable lifting chains to support engine.
7.
8.
Remove 2 nuts securing engine mounting to
chassis.
Remove 4 bolts securing engine mounting
bracket to cylinder block.
9.
Remove nut securing mounting to mounting
bracket.
10.
Remove mounting and mounting bracket.
20
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field