1999-2002 Land Rover Defender Workshop Manual

19
FUEL SYSTEM
POTENTIOMETER - THROTTLE
Service repair no - 19.30.14
Remove
PUMP - FUEL
Service repair no - 19.45.08
Remove
NOTE: The throttle potentiometer is an
integral part of the throttle pedal assembly
and must not be dismantled.
1.  Remove fuel tank.  See this Section.
2.
3.
Using LRT-19-009 remove locking ring from fuel
pump housing.
Remove fuel pump from tank and discard
sealing ring.
1.
2.
With assistance remove 2 nuts and bolts
securing throttle pedal to body.
Disconnect multiplug from throttle potentiometer
and remove throttle pedal.
Refit
4.
Clean pump housing and mating face on fuel
Refit
tank.
5.
Fit seal to pump housing.
NOTE: From Vin 607225 a three track
throttle potentiometer was fitted in place
of a two track potentiometer. Three track
6.  Fit pump to fuel tank and secure with locking
ring.
7.  Fit fuel tank.  See this Section.
potentiometers cannot be fitted to vehicles
previously fitted with two track potentiometers.
Two track potentiometers can be fitted to vehicles
previously fitted with three track potentiometers,
but TestBook must be used to configure the ECM.
3.
4.
Connect multiplug to throttle potentiometer.
Position throttle pedal assembly, tighten nuts
and bolts to 25 Nm (18 lbf.ft).
10
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field