1999-2002 Land Rover Defender Workshop Manual

ENGINE
11.
Before refitting the camshaft cover, the fuel
injector rockers must be adjusted.
Remove LRT-12-058.
Rotate engine clockwise until No. 1 injector lobe
is at full lift.
GASKET - COVER - CAMSHAFT
Service repair no - 12.29.40
Remove
12.
13.
14.
15.
Rotate rocker adjusting screw clockwise until the
injector plunger is felt to bottom out.
Rotate rocker adjusting screw anti-clockwise 1
complete turn to give the plunger the required
bump clearance and tighten rocker adjusting
screw locknut to 16 Nm (12 lbf.ft) .
1.  Remove battery cover.
2.  Disconnect battery negative lead.
3.  Remove 3 bolts and remove engine acoustic
cover.
CAUTION: Ensure screw does not turn as
locknut is tightened.
16.
17.
Carry out above procedure for the remaining 4
rockers.
After completion of rocker adjustment, slowly
rotate engine clockwise 2 complete turns by
hand to ensure that no injectors are bottoming
out on their plungers.
18.
19.
Fit camshaft cover gasket.  See this Section.
Fit cooling fan.  See  COOLING SYSTEM,
Repair.
4.
5.
Release clip and disconnect breather hose from
camshaft cover.
Remove 13 bolts, spacers and sealing washers
from camshaft cover.
6.
Remove camshaft cover and gasket.
Refit
7.
8.
Clean camshaft cover and mating face.
Renew sealing washers and spacers as
necessary.
REPAIR
13
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field