ENGINE
Refit
MOUNTING - GEARBOX - REAR - LH
Service repair no - 12.45.07
Remove
11.
12.
Fit mounting and mounting bracket.
Fit mounting bracket to cylinder block bolts and
tighten to 48 Nm (35 lbf.ft) .
13.
14.
Fit nuts securing mounting to chassis and tighten
to 85 Nm (63 lbf. ft).
Fit mounting to mounting bracket nut and tighten
to 85 Nm (63 lbf.ft) .
1. Raise vehicle on ramp.
2. Position jack to support gearbox.
15.
16.
Remove engine support chains.
Position fuel cooler. Apply Loctite 242 to bolts
and tighten to 18 Nm (13 lbf.ft).
17.
18.
19.
Remove stand(s) and lower vehicle.
Reconnect battery negative lead.
Fit engine acoustic cover. See this Section.
3.
4.
Remove 4 bolts securing mounting bracket to
transfer gearbox.
Remove 2 nuts, remove mounting and mounting
bracket.
5.
Remove heat shield from mounting.
Refit
6.
7.
8.
Clean mounting and mating faces.
Position heat shield to mounting.
Position mounting and mounting bracket and
tighten nuts to 48 Nm (35 lbf.ft) and bolts to 85
Nm (63 lbf. ft).
9.
Lower support jack.
10.
Lower vehicle.
REPAIR
21
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)