1999-2002 Land Rover Defender Workshop Manual

ENGINE MANAGEMENT SYSTEM
Input / Output
The glow plugs receive a feed from the glow plug relay (C0215-3) on a yellow/black then individual black wires.
The ECM provides the earth path for the glow plug relay (C0151-6), working in tandem with the Alarm ECU. The
supply voltage heats the coils to approximately 1000 °C (1832 °F). The glow plug circuit is wired in parallel, the
body of each glow plug is screwed directly into the engine block which provides each glow plug with an earth path.
The glow plugs can fail in one or more of the following ways:
Heater coil open circuit.
Control coil open circuit.
Poor earth quality.
Short circuit to vehicle supply.
Short circuit to vehicle earth.
Harness fault.
Relay windings open circuit.
Incorrect relay fitted.
In the event of a glow plug failure, any of the following symptoms may be observed:
Difficult starting.
Excessive smoke emissions after engine start.
DESCRIPTION AND OPERATION
25
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field