1999-2002 Land Rover Defender Workshop Manual

82
AIR CONDITIONING
Refit
20.
21.
Clean TXV and mating face.
Lubricate new ’O’rings with refrigerant oil and fit
’O’ rings to pipes.
22.
23.
24.
25.
26.
Position TXV and tighten Allen screws.
Position evaporator and fit sensor.
Position cover and tighten screws.
Clean pipes and mating faces.
Lubricate and fit new ’O’ rings, position pipes
and tighten Allen screw.
27.
28.
Connect trinary switch multiplug.
Position blower unit,tighten screws and connect
multiplugs.
29.
With assistance position A/C duct assembly to
vehicle.
30.
31.
32.
Connect drain pipe to evaporator.
Connect multiplug to relay bracket.
Align A/C duct to fascia, tighten securing bolt
and screws.
33.
34.
35.
36.
Position speakers and connect Lucars.
Position relay bracket and tighten bolts.
Clean pipes and mating face.
Lubricate and fit new ’O’rings to evaporator
pipes.
37.
Position pipes and tighten bolts to 6 Nm (4
lbf.ft).
38.
39.
Renew receiver drier.  See this Section.
Recharge A/C system.  See  Adjustment.
6
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field