1999-2002 Land Rover Defender Workshop Manual

12
ENGINE
9.
Using tool LRT-12-154/3, fit new sealing washer
to each injector.
10.
Support each end of cylinder head on blocks of
wood.
CAUTION: Ensure blocks are clear of
valves.
11.
12.
Position reaction posts in their original fitted
order.
Carefully fit EUI’s, ensuring they are in their
original fitted order and that each retainer is
located on its dowel.
4.
Assemble valves, springs and valve spring caps
ensuring that they are in their original fitted
order.
Compress valve springs using tool LRT-12-034,
fit collets.
Using a wooden dowel and mallet, tap each
spring cap lightly to seat collets.
Lubricate new injector ’O’ rings with engine oil.
5.
6.
7.
CAUTION: If new EUI’s are fitted, ensure
replacements are correct. Engine Serial
No. Prefixes 10P to 14 - Push rod bushes
are coloured BLACK or BLUE. Engine Serial No.
Prefixes 15P to 19P - Push rod bushes are
coloured GREEN.
13.
Fit new retainer bolts and tighten to 32 Nm (24
lbf.ft) .
CAUTION: If new injectors are fitted they
must be programmed for use with the ECM
using Testbook.
14.
15.
Lubricate lash adjusters and bores with engine
oil.
Fit lash adjusters ensuring they are in their
original fitted order.
8.
Using tool LRT-12-154/2, fit ’O’ ring to each
injector.
18
OVERHAUL
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field