1999-2002 Land Rover Defender Workshop Manual

ELECTRICAL
BELT - AUXILLARY DRIVE
Service repair no - 86.10.03
Remove
HARNESS - INJECTORS
Service repair no - 86.70.22
Remove
1.
Remove cooling fan.  See  COOLING SYSTEM,
1.  Remove camshaft cover gasket.  See  ENGINE ,
Repair.
Repair.
2.
Release drive belt tensioner using a 15 mm ring
spanner and release belt from pulleys.
2.  Disconnect engine harness from injector
harness.
3.
Disconnect multiplugs from injectors.
Refit
3.
4.  Release injector harness from camshaft carrier
and remove harness.
Clean drive belt pulley grooves and ensure
grooves are not damaged.
Refit
4.
Fit new drive belt around pulleys, ensure belt is
correctly aligned in pulley grooves.
With assistance, hold tensioner fully clockwise
and fit drive belt around remaining pulley.
Fit cooling fan.  See  COOLING SYSTEM,
Repair.
5.  Fit new ’O’ rings to injector harness connector.
6.  Position harness and locate connector to
camshaft carrier.
7.  Connect injector and engine harness multiplugs.
8.  Fit camshaft cover gasket.  See  ENGINE ,
Repair.
5.
6.
REPAIR
1
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field