FUEL SYSTEM
SENSOR - COMBINED MAP AND IAT
Service repair no - 19.22.26
Remove
SENSOR - AMBIENT AIR PRESSURE (AAP)
Service repair no - 19.22.27
Remove
1.
Remove 3 bolts and remove engine acoustic
cover.
1.
2.
Disconnect multiplug from AAP sensor.
Remove 2 screws and remove sensor.
2.
3.
Disconnect multiplug from combined MAP and
IAT sensor,
Remove 2 bolts securing sensor to inlet
manifold.
3. Remove and discard ’O’ ring.
Refit
4.
Remove sensor and discard ’O’ ring.
4. Clean sensor and air cleaner cover.
Fit new ’O’ ring, fit sensor and tighten screws.
6. Connect multiplug to AAP sensor.
5.
Refit
5.
6.
7.
Clean sensor and mating face.
Fit new ’O’ ring and position sensor to manifold.
Fit and tighten MAF and IAT sensor bolts to 9
Nm (7 lbf.ft)
8.
Fit engine acoustic cover and secure with bolts.
REPAIR
3
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)