PANEL REPAIRS
Prepare Old Surfaces
4.
Cut away the bulk of the panel as necessary
using an air saw.
6.
Clean all panel joint edges to a bright smooth
finish, using a belt-type sander.
NOTE: On certain panel joints MIG welds
and braze should be removed using a
sander where possible, before cutting out
NOTE: Prior to sanding, remove remaining
sealant using a hot air gun to minimise the
risk of toxic fumes caused by generated
the panel bulk.
heat.
WARNING: Care must be taken to avoid
excessive heat build up which may be
caused by this equipment.
5.
Separate spot welded joints and remove panel
remnants using hammer, bolster chisel and
pincers.
7.
Straighten existing joint edges using shaping
block and hammer.
CAUTION: Where significant straightening
is required, heat must be applied to the
area to avoid stretching the Aluminium.
CAUTION: All tools used for working with
Aluminium must be kept separate from
those used on steel.
PROCEDURES
3
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)