ENGINE
GASKET - CYLINDER HEAD
Service repair no - 12.29.02.01
Remove
CAUTION: The following procedures
should only be carried out when cylinder
head is to be overhauled; for replacement
of cylinder head gasket only, see Repairs section -
Gasket - Cylinder head.
NOTE: The following procedure covers
both EU3 and non EU3 engines
1.
2.
Remove exhaust manifold gasket. See
MANIFOLD AND EXHAUST SYSTEM, Repair.
Remove inlet manifold gasket. See MANIFOLD
AND EXHAUST SYSTEM, Repair.
9.
Set engine to TDC firing - No. 1 cylinder -
coloured links on timing chain are aligned with
timing mark on camshaft sprocket.
10.
Fit timing pin LRT-12-058 into slot in camshaft.
3.
4.
Models with EGR cooler:Remove and discard
2
Allen screws securing EGR pipe to cooler.
Progressively loosen then remove 13 bolts
securing camshaft cover, remove cover; remove
and discard gasket.
5.
6.
Remove isolators and sealing washers from
cover.
Disconnect injector multiplug from camshaft
carrier.
7.
8.
Disconnect multiplug from ECT sensor.
Remove bolt securing alternator strap bracket to
cylinder head.
OVERHAUL
3
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)