1999-2002 Land Rover Defender Workshop Manual

ENGINE
Cylinder head and camshaft carrier - cleaning
1.
Thoroughly clean cylinder head mating faces,
ensure oil and coolant passages are clear and
bolt holes are clean and dry.
CAUTION: Take care to ensure that EUI
drillings are clear.
2.
Using suitable solvent, remove all traces of
sealant and gasket material.
CAUTION: Do not use metal scrapers.
3.
4.
Remove all traces of oil from camshaft bearings
and journals.
Clean glow plug threads.
Cylinder head - Inspection
1.
Check core plugs for signs of leakage and
corrosion, seal replacement plugs with Loctite
243.
23.
24.
25.
Remove 3 bolts and remove fuel connector
block from cylinder head.
Remove and discard gasket, ’O’ ring and fuel
filter.
Remove spacer block and gasket (if fitted).
2.
Check cylinder head for warping across centre
and from corner to corner.
Maximum cylinder head warp = 0.1 mm (0.004
in).
CAUTION: Cylinder heads may not be
refaced, replace the head assembly if
warping exceeds the limit given.
OVERHAUL
11
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field