1999-2002 Land Rover Defender Workshop Manual

TRANSFER GEARBOX
DIFFERENTIAL LOCK WARNING LAMP SWITCH
Service repair no - 41.20.36
Adjust
HIGH/LOW SELECTOR LINKAGE
Service repair no - 41.20.46
Adjust
NOTE: This procedure is only necessary
for switches fitted with a locknut in place
of the threaded spacer.
1.  Disconnect battery negative lead.
2.  Remove gear lever knobs.
3.  Remove gearbox tunnel carpet.
4.
5.
Remove gear lever (s) gaiter.
Release and remove insulation pad from around
gear levers.
6.
7.
8.
Remove 2 screws securing relay/fuse panel and
collect 2 spacers.
Release bulkhead carpet from LH side of tunnel
and move aside.
Remove 2 bolts securing hand-brake lever to
body and move aside.
1.
2.
3.
4.
5.
Move differential lock selector fork to differential
locked position.
Connect a 12V test lamp and battery to
differential lock warning lamp switch.
Screw switch in until test lamp is illuminated then
screw switch in a further 1/2 turn; tighten locknut.
Disengage differential lock, check that test lamp
is extinguished.
Remove test lamp.
9.
10.
11.
Remove 13 screws securing tunnel cover.
Release and remove tunnel cover.
Loosen linkage locknut.
ADJUSTMENT
1
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field