60
FRONT SUSPENSION
12.
Knock back staking and using a suitable socket,
remove and discard hub nut.
Remove washer from hub.
Remove hub and brake disc assembly complete
with bearings.
31. If end float is present refer to table for correct
spacer and change spacer as necessary.
32. When no end float is evident, remove the dial
gauge and mounting bracket.
13.
14.
33. Stake the hub nut.
34.
35.
36.
Clean hub and axle shaft faces.
Fit new driving member gasket.
Position driving member to hub and tighten new
bolts to 65 Nm (48 lbf.ft).
37.
38.
Fit original shim(s) to drive shaft and secure with
circlip.
Position brake caliper to hub, align fixings, fit
bolts and tighten to 82 Nm (60 lbf.ft).
Remove plugs from brake pipe connections.
Connect brake pipe union to jump hose and
tighten union.
39.
40.
CAUTION: Use 2 spanners when
tightening or loosening unions.
41.
42.
Remove brake hose clamp from jump hose.
Bleed brake system. See BRAKES,
Adjustment.
43.
44.
Fit road wheel, remove axle stand and tighten
wheel nuts to 130 Nm (95 lbf.ft).
Operate foot brake to locate brake pads before
taking vehicle on road.
15.
16.
Remove outer bearing and spacer from hub.
Remove grease seal and inner bearing from
hub.
Remove inner and outer bearing tracks from
hub.
17.
Refit
18.
19.
20.
21.
Clean hub and bearing locations.
Fit inner and outer bearing tracks to hub.
Pack inner bearing with grease and fit to hub.
Fit new seal flush with rear face of hub using
LRT-54-003 and LRT-99-003.
Clean stub axle.
22.
23.
Pack outer bearing with grease, fit spacer and
bearing to hub.
24.
25.
26.
27.
28.
Position LRT-54-019 over hub nut threads on
axle casing.
Fit hub assembly to stub axle, remove
LRT-54-019.
Fit washer and new hub nut and tighten to 30
Nm (22 lbf.ft).
Rotate and push/pull hub to setle bearings.
Tighten hub nut to 210 Nm (150 lbf.ft).
To check drive shaft end float, mount a dial
gauge using bracket LRT-99-503 to driving
member bolt hole.
29.
30.
Ensure dial gauge is contacting hub nut face.
Move drive shaft in and out noting dial gauge
reading.
2
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1999, 2000, 2001, 2002 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)