1999-2002 Land Rover Defender Workshop Manual

MANIFOLD AND EXHAUST SYSTEM
EXHAUST - TAIL PIPE AND SILENCER
Service repair no - 30.10.22
Remove
GASKET - INLET MANIFOLD
Service repair no - 30.15.08
Remove
1.
Raise vehicle on ramp.
1.  Remove battery cover.
2.
3.
Disconnect battery negative lead.
Remove 3 bolts and remove engine acoustic
cover.
4.
Release retainers and remove cooling fan cowl.
2.
3.
Remove 3 nuts securing silencer to tail pipe.
Release tail pipe from mounting and remove tail
pipe.
4.
Collect silencer to tail pipe gasket.
Refit
5.
6.
Clean silencer and tail pipe mating faces.
Position tail pipe and secure on mounting
rubber.
5.
Disconnect multiplug from manifold air pressure
sensor and release 4 glow plug leads.
7.
8.
Using a new gasket, align silencer to tail pipe.
Fit nuts to silencer and tighten to 25 Nm (18
lbf.ft).
6.
Remove 4 bolts, release EGR valve from inlet
manifold and discard gasket.
REPAIR
3
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field