1999-2002 Land Rover Defender Workshop Manual

86
ELECTRICAL
Refit
HORN - LH
12.
13.
Clean mating face of alternator and vacuum
pump.
Fit vacuum pump to alternator and tighten bolts
to 10 Nm (7 lbf.ft) .
Service repair no - 86.30.10
Remove
14.
15.
Position alternator and connect multiplug.
Connect vacuum hose and oil drain hose to
vacuum pump and secure clip.
1.  Remove LH headlamp.  See this Section.
16.
17.
18.
19.
20.
21.
22.
With assistance align alternator to mounting
bracket and fit but do not tighten bolt.
Fit bolt securing support stay to alternator and
tighten to 25 Nm (18 lbf.ft) .
Tighten alternator to mounting bracket bolt to 45
Nm (33 lbf.ft).
Using new ’O’ ring, fit and tighten lubrication pipe
union to 10 Nm (8 lbf.ft) .
Connect lead to alternator and tighten nut to 6
Nm (4.4 lbf.ft)  .
Fit auxilliary drive belt tensioner and tighten bolt
to 50 Nm (37 lbf.ft) .
Fit auxilliary drive belt.  See this Section.
2.
3.
Disconnect horn multiplug.
Remove nut and remove horn from mounting
bracket.
Refit
4.
Position horn, tighten securing and connect
multiplug.
5.
Fit LH headlamp.  See this Section.
4
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1999, 2000, 2001, 2002
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 627 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field