UNDERSTANDING THE FEATURES OF YOUR VEHICLE
105
To Set At A Desired Speed
To Resume Speed
When the vehicle has reached the desired speed , press
down on the lever and release. Release the accelerator
and the vehicle will operate at the selected speed .
To resu me a previou sly set speed , push the “RESUME
ACCEL” lever up and release. Resume can be used at any
speed above 20 mph (32 km/ h).
NOTE: The vehicle shou ld be traveling at a stead y
speed and on level grou nd before pressing the SET lever.
To Vary The Speed Setting
3
When the speed control is ON, speed can be increased by
pushing up and hold ing “RESUME ACCEL”. Release the
lever when the desired speed is reached , and the new
speed will be set.
To Deactivate
A soft tap on the brake pedal, pulling the speed control
lever tow ard s you “CAN CEL”, or norm al brake or clutch
pressu re while slow ing the vehicle will deactivate speed
control withou t erasing the set speed memory. Pressing
the ON/ OFF button or turning off the ignition switch
erases the set speed memory.
Tapping “RESUME ACCEL” once will resu lt in a 2 mph
(3 km/ h) speed increase. Each time the lever is tap ped,
speed increases so that tap ping the lever three times will
increase speed by 6 mph (10 km/ h), etc.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)