204
UNDERSTANDING YOUR INSTRUMENT PANEL
11.
Brake Warning Light
12. Anti-Lock (ABS) Warning Light
After ignition is turned on, illuminates to ind icate
function check at vehicle start-u p. Ind icates park-
ing brake is applied. If the light stays on when the
parking brake is off, it ind icates a possible brake system
fluid leak or low pressu re level, see you r authorized
dealer immediately.
After ignition is turned on, illuminates to ind icate
function check at vehicle start-u p. If light rem ains
on after start-u p or comes on and stays on at road speed s,
it may ind icate that the ABS has detected a malfunction
or has becom e inop erative. The system reverts to stan-
dard non-anti-lock brakes.
If the parking brake is applied and the vehicle is in
motion, the red BRAKE warning light will “flash” and a
chim e will sou nd .
If both the red BRAKE warning light and the amber ABS
warning light are on, see you r dealer immediately. Refer
to “Anti-Lock Brake System ” in Section 5 of this manu al.
The operation of the BRAKE warning light can be
checked by turning the ignition switch from the OFF
position to the ON position. The light shou ld illuminate
for approxim ately two second s. The light shou ld then
turn off unless the parking brake is applied or a brake
fault is detected . If the light does not illuminate, have the
light insp ected by an authorized dealer.
13. Airba g Warning Light
This ind icator lights and rem ains lit for 6 to 8
second s when the ignition is first turned on. If
the light does not come on for 6 to 8 second s,
stays on or comes on while driving, have the
airbag system checked by an authorized dealer.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)