THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
69
NOTE: To reset this featu re you must let all of the belt
webbing retu rn into the retractor. You will not be able to
pull out more webbing until all of the webbing has been
retu rned back into the retractor.
head restraint and attached to the tether anchor on the
rear of the seat back. Then tighten all three strap s as you
push the child restraint rearw ard and downw ard into the
seat.
2
Installin g the Child Restrain t System
Not all child restraint system s will be installed as we
have described here. Again, carefu lly follow the instru c-
tions that come with the child restraint system .
We urge that you carefu lly follow the directions of the
manu factu rer when installing you r child restraint. Many,
but not all, restraint system s will be equ ipped with
separate strap s on each side, with each having a hook or
connector and a means for adjusting the tension in the
NOTE: If you r child restraint seat is not LATCH com-
patible, install the restraint using the vehicle seat belts.
strap . Forw ard -facing tod dler
restraints
and
som e
WARN ING!
rearw ard -facing infant restraints will also be equ ipped
with a tether strap with a hook and means for adjusting
the tension in the strap .
An incorrectly anchored teth er strap could lead to
increased head motion and possib le injury to the
child . Use only the anchor position directly behind
the child seat to secu re a child restrain t top teth er
strap .
In general, you will first loosen the adjusters on the lower
and tether strap s so that you can more easily attach the
hook or connector to the lower and tether anchorages.
The tether strap shou ld be rou ted und er the center of the
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)